Description

The LEDSON Epix14+ Strobe x 2 LED ramp package is specially designed for Volvo FH models from 2021 onwards. A specially designed and Swedish-made mounting kit enables quick and cost-effective installation. The bar can be mounted concealed behind the front grille or visible through the grille. 
 

Contents:
2 x Epix14+ Strobe LED ramps (item no. 334915089)
Specially adapted mounting kit for Volvo FH model year 2021 or later


Epix+ is characterised by a proprietary, sporty design adapted for modern vehicles. The ramp is equipped with an R65-approved flashing light that ensures visibility when working on the road. The position light is integrated into the reflector and has a dynamic ignition that provides an effective start sequence. The ramp is optimised for maximum performance in E-approved mode and also offers a Powerboost function for off-road use. Smart mounts allow for flexible installation.
The design is exclusively developed by Ledson and harmonises with contemporary vehicle aesthetics. The dynamic position light turns on with a sweeping motion from one side to the other before reaching full brightness. The integration of the position light into the reflector is a unique design.
The Powerboost function is activated by tightening or loosening a screw on the ramp, which switches between E-approved mode and a more powerful light mode for use off public roads.
Epix+ Strobe offers ten different flash patterns, one of which is R65-approved. The strobe light is used in emergency situations and is a requirement when working on roads. The function contributes to increased safety by warning other road users and reducing the risk of accidents.

Flash patterns:

Single flash, synchronised: 2.2 Hz
Single flash, asynchronous: 2.2 Hz
Triple flash, synchronised: 1.1 Hz
Triple flash, asynchronous: 1.1 Hz
Quad flash, synchronised: 1.25 Hz
Quad flash, asynchronous: 1.25 Hz
Combination of one long and five short flashes, synchronised: 0.83 Hz
Combination of one long and five short flashes, asynchronous: 0.83 Hz
Flash series, synchronised: 10 Hz
Flash series, asynchronous: 10 Hz

Please note that the DT connector must not be cut, as this increases the risk of moisture damage and will invalidate the warranty. ATP connector (male) with splice is included with the product.

Technical