Breeze X1 from Ledson is an ultra-slim tail light, just 28 mm deep, combining sleek, modern design with cutting-edge technology. Perfect for those looking to give their vehicle a sophisticated and contemporary look without compromising functionality. 

Breeze X1 is available with the following approved functions:

• Tail light / brake light / indicator

• Tail light / reverse light

• Tail light / rear fog light

In addition, the version with indicator features a built-in dynamic indicator function, allowing you to connect up to four lights per side.

It can be mounted both horizontally and vertically, with both mounting options E-marked according to ECE R148. The ultra-slim design and generous 2.5-meter cable length make this tail light easy to install.

Breeze X1 is available with either smoked lens or clear/transparent lens.

Specifications:

• Smoked or clear lens
• Multifunction tail light
• ECE R148 (approved for all functions)
• Total of 162 pcs LED 
• IP67 rated (waterproof and dustproof)
• Voltage: 10-48V
• Warranty: 36 months
• Two screws and an instruction manual are included.

Measures:

• Width: 110 mm
• Height: 133 mm
• Depth (total): 28 mm
• Depth (recess): 10 mm
• Cable: 2,5 m
• CC: 115 mm

Synchronized Turn Signals: To ensure all turn signals on the same side flash simultaneously, connect all the yellow cables together on that side.

Dynamic turn signal: To achieve a dynamic turn signal, connect the yellow cable from the most inner light as in signal from the existing turn indicator signal. Then connect the green cable from the most inner light to the yellow cable on the light beside the first and continue this pattern from the inner to the outer lights.

NOTE! Should only be tightened by hand. Only use the included screws for installation.

Cable colors:

• Black - earth (ground)
• White - tail light
• Red - brake light
• Yellow - indicator (input signal)
• Green - output signal for indicator to the next light