Treat yourself to the best. Epix+ stands out from the crowd with a self-developed sporty design, created with today’s modern cars in mind. Approved R65 warning lights ensure your visibility and the world-unique position light is fully integrated into the reflector.

Epix+ Prime stands out with its own sporty design, developed with today's modern cars in mind. The approved R65 strobe light ensures high visibility and the world-unique Position light is fully integrated into the reflector. Epix14+ is also available in a version without strobe light.
The dynamic ignition of the position light gives the LED bar an impressive start-up. Everything you could want in a LED bar can be found in Epix+ Prime. Performance is maximised in E-approved mode, with the option of powerboost when driving in off-road mode. The R65-approved strobe light provides clear warning lighting when working on the road and contributes to safety in all weather conditions and at all hours of the day. Proprietary, smart mountings allow installation virtually anywhere on the vehicle.

Epix+ Prime is designed for those looking for a future-proof lighting solution. The ramp design is uniquely developed by Ledson and harmonises with today's most modern car models, enhancing the overall appearance of the vehicle. The dynamic position light turns on with an effective movement that runs along the ramp from one side to the other before reaching full brightness. The position light is integrated into the reflector, a unique design that makes the ramp stand out visually.

The powerboost function allows you to select the desired light level. By tightening or loosening a screw on the ramp, you can easily switch between E-approved mode and "off-road" power boost mode, intended for situations where maximum brightness is required on the road ahead of the vehicle.
The Driving Beam beam pattern (Drive) is based on computer-generated reflectors designed to mimic a combination beam pattern. The beam pattern enhances and complements the car's existing headlights and provides a wide and elongated field of light.

For connection, we recommend using a DT relay set with 1 x 6-pin DT connector (item no. 7801006). The Ledson Connect system is very easy to install and can also be expanded if necessary to add auxiliary lights or more LED bars in the future.

The delivery includes Epix14+ powerboost 14" LED bar, bolts and screws for mounting in a suitable surface, mounting details for end mounting and mounting details for rear mounting, both standing and hanging. A 6-pin DT connector is included; a separate 6-pin cable set is required and is specified in the product information. Installation instructions are included.

Flash patterns include:
Single flash synchronised 2.2 Hz
Single flash asynchronous 2.2 Hz
Triple flash synchronised 1.1 Hz
Triple flash asynchronous 1.1 Hz
Quadruple flash synchronised 1.25 Hz
Quadruple flash asynchronous 1.25 Hz
Combination of one long and five short synchronised 0.83 Hz
Combination of one long and five short asynchronous 0.83 Hz
Flash series synchronised 10 Hz and flash series asynchronous 10 Hz.

Please note that the DT connector must not be cut, as this increases the risk of moisture damage and will invalidate the warranty.