Epix31 Slim Curved - a sleek, curved light bar in a compact design that delivers impressive range and wide light coverage.

Epix31 Slim Curved is carefully designed to harmonize with modern vehicles that have a slightly curved front, allowing the bar’s curved shape to follow the lines of the vehicle seamlessly. The light pattern also becomes wider toward the sides of the road compared to a traditionally straight bar. Its compact size is perfect for those who demand performance without compromising on aesthetics.

Pulse-Controlled Powerboost - It Doesn't Get Smoother Than This

Epix31 Slim Curved comes equipped with Powerboost—an extra power mode for those moments when you need (or simply want) maximum brightness. A simple flick of the high beam lever activates this impressive brightness, allowing you to easily adjust the auxiliary light's output according to your needs. With the new generation of Powerboost, you can seamlessly switch modes using the high beam flash in just a few easy steps Note: Your auxiliary light is delivered in E-approved mode. Please follow the instructions to activate Powerboost mode.

Driving Beam Light Pattern (Drive)
Epix31 Slim Curved also carries over the advanced Driving Beam light pattern from previous Epix models. Each reflector is carefully designed to mimic and enhance the vehicle's existing headlights, providing an optimal light pattern for the road ahead. Thanks to the curved design, it also offers a slightly wider light spread compared to the straight version of the Epix31 Slim.

Features and technical data:

• Curved design (approximately 7°) that matches a curved front
• Driving Beam light pattern (slightly wider light compared to a straight bar)
• E-marked R149 (ref. nr. 50), R10 (EMC rated)
• Range: 462 m (1 lux), Powerboost: 572 m (1 lux)
• 14600 lumens (theoretical), 11000 lumens (actual)
• Color temperature 5000K (Neutral White)
• 162 W (27 x 6 W LEDs)
• Voltage: 9-36V
• IP69K (water/dustproof)
• Aluminum housing and polycarbonate lens
• Side reflective optics
• Pressure equalization membrane
• Electronic heat management
• DT connector (supplied)

Supplied:

• Epix31 Slim Curved 31" LED bar
• Bolts and screws to attach the bar to appropriate surface
• Smart mounting details
• DT cable 2-pin (you will also need a DT harness)
• Installation instructions

Dimensions & weight (excl mounting):

• Width: 784 mm
• Height: 33 mm
• Depth: 59 mm

NOTE: The DT connector must not be cut as it entails an increased risk of moisture damage and the warranty then ceases to apply. 

Technical information

Light flux - 14600 lumens (11000 actual)
Depth - 59 mm
Height - 33 mm
Use of power - 162W (27 x 6W LP LED)
Width - 784 mm
Range - 462m (1 lux), Powerboost: 572m (1 lux)
Unit - st
Warranty - 36 Months
Area of ​​use - Outdoor use
Beam pattern - Driving beam
Start time - Immediately
Voltage - 9-36 V
Manufacturer - Ledson